I have a few old Rip saws Ive acquired through yard sales and flea markets as well as a new Pax from England. I barely touch the Pax except for soft, green wood outside of my shop...kind of the weekend work, helping out the brother-in-law build a fence or deck stuff. The particular saw in question is the one pictured above; the medallion says Corporate Mark Kangaroo and the plate has Rob Sorby Sheffield punched into it.
Its 28" long and filed at 6 tpi. (teeth per inch) I sent it down to Mark at Technoprimitives and he over hauled it last year. Needless to say he did an amazing job and it became my daily user.
Its the main saw I reach for except when ripping stock in the 1/2" range. I have another old Disston that has a 24" saw plate and is filed at 10 tpi. Between these two that usually takes care of my ripping needs but Im very interested in the new Lie Nielsen panel saws. I have a few other old Rip saws as well but theyre in need of some work. When ripping wood, to further answer the question asked I generally use my saw bench. This is the design by Chris Schwarz published in Woodworking Magazine a few years back. Its a nice design and a perfect height but I find with the two angled legs I sometimes hit the end of the saw into the lower stretcher...Ive since designed my own saw bench and will share it with you here in a future post. For small stock I usually just fore go the saw bench and use my tail vise for most of my rip cuts. My bench is low enough that I never seem to have an issue with this method. Ill sometimes hold the piece in the tail vise and use a hold fast as well on my bench top to keep the work piece stable. I also have a couple of shop bents as I call them. Basically theyre saw horses that are the same overall dimension as the end profile of my work bench. Ill use these from time to time when ripping the edge of real large work but this is pretty rare in my shop.
The plans for these will be in my book so I better not put them here...my editor may whack me across the knuckles with a yard stick!
Ripping wood by hand is probably one of the most intimidating things for people considering a hand tool only work shop; its time and labor intensive but once you get your head around it it quickly becomes second nature. I clearly remember thinking back when I was first considering a shop with no power tools and the idea of ripping all of the wood for a piece of furniture scared the hell out of me! That said, its been a year of hand saws and wood shavings and I dont even think about it now...assembling a cut list and grab the saw. It actually doesnt take that long either-another mis-conception I had.
So for anyone starting down this road Ill recommend a full size panel saw in the 28" ball park with a low tooth count for thick stock and then a smaller panel saw with a finer tooth for lighter work.
The saw bench mentioned from Woodworking Magazine is a great design and Id recommend it to anyone but for me and my body type it wasnt a perfect fit. Try ripping along the workbench too, this is my preferred method but again to each his own...what ever feels comfortable is alchoices the best choice to go.
Cheers!
0 komentar:
Posting Komentar