Long Time No See

Ive been AWOL for a while, but not without good reason: on September 3rd I became a father!

Virginia is over 2 months old now and the new "normal" is starting to settle in.  All is well in our household.
Ive been out in the garage some too, thanks to the generosity of my wife.  I finished a little companion side table in the same style as the coffee table:

If youre interested in the construction techniques, just read the last few posts and add a mortised shelf into the legs...it was basically the same thing with different dimensions.  I did have a little help tapering the legs though:

Ive been acquiring a few additional tools recently and Im starting to run out of storage space for them.  Various current storage solution integrated into my bench have served me well for the past year, but now I have more saws than can fit on the end, more hand planes than I have hangers for, and more chisels than can fit in the little area on the bench corner...truly, woe is me.  I also got a sweet Lie-Nielsen router for my birthday and its just been floating around the garage, pitifully homeless.  This is no choice to live.

Serendipitously enough, The Anarchists Tool Chest, by Chris Schwarz is sweeping the nation, offering relief for those with just this problem.  ATC offers sage advice for assembling a functional set of hand tools and ends with a design for a chest in which to hold them.  My wife (did I mention she is generous) got me a copy for my birthday...

..and so it begins.

Heres Chriss (unpainted):

http://lostartpress.wordpress.com/2010/12/12/men-of-the-earth/

Pretty sweet.
Im making mine primarily out of cypress, its local, light, water-/rot-resistant, relatively inexpensive, and just about the easiest wood in the world to work.  Tonight I finally finished dovetailing the body.  The two long faces are the tail boards and I cut them together:

Ive been wanting a beefier rip backsaw than my little Gramercy dovetail saw for some time now.  If money wasnt an issue Id be on the waiting list for this guy, brass-backed, open mesquite handle, please.  But money is a factor, so I pulled the trigger on one of the undisputed best values in woodworking, a Veritas backsaw.  I was torn between the standard dovetail and the carcass and went with the carcass (band name, anyone?) saw in the end (bought in the presence of Frank Klausz at Highlands Fall shindig).
I like it.  It cuts fast and straight; what else could you ask for in a saw?  Good looks?  Well yeah, theres that issue...oh well.
Lots of sawing and chopping later:

It never gets old.  There are some subtleties here that arent immediately obvious.  The tail board (top) is two boards glued together while the pin board is three.  Their seams dont line up: this ensures that even if the glue were to fail, the frame would still be held together by the dovetail joint.  If their seams lined up there would be a chance that the whole chest could separate in two (a top and a bottom) if it were lifted by its top.  Also, on the tail board, the seams terminate in the tails, not the tail sockets; on the pin board, the seams terminate in the pins, not the pin sockets.  This is so that the joint is actually clamping those seams tighter, not trying to open them up.
Bottom line: itll hold.
I made a simple caul for the glue-up to ensure that the tails seat fully into their sockets.

Ive marked the material that I want to leave with a Sharpie.  Then I cut a little saw kerf and chiseled achoice the waste in between the marked areas.

Now I can exert all the clamping force where it needs to be: on the tails.
So thats where I am now, my first corner is drying right now.  Im using Titebond Liquid Hide Glue on this project which is great for these massive joints because of its long working time; however its long set time will slow a project down a little bit.  For those of you who were wondering, they dont call it "hide" glue because its hard to see.  Look it up.
Thats all for now, Ill write again when I reach another good stopping point and time permits.

Related Posts by Categories